Underbody anti rust coat (rubber paint as called by the painter here) was applied. I have told them to let is dry then send the tub to the denter.
BHPian BABABOT recently shared this with other enthusiasts:
Update
Paint Job Today , pint remover was applied on the underbelly of the tub. There after proper cleaning and washing was done. Sealant was applied. Now underbody anti rust coat( rubber paint as called by the painter here) was applied. I have told them to let is dry then send the tub to the denter. No paint work is being done now on the other part of the Tub.
Chassis The work on the chassis has been completed. The pending work now is
a. Changing of the differential oil
b. Greasing. I came to know they are 20 points(nipples) in which greasing needs to be done ( road springs, differentials, shafts etc)
However these will be done at the very end when I change the filters and all the oil and lubs.
Next course of action
Once the underbody is dried. the tub will be mounted on the chassis. New bushes(I guess that is the name of the rubberized are being used on the mounts). The denter then takes over to fix the mounts for the seats and the roll bar.
Here are the pictures of the roll cage in use for the last 8 odd years without any issue.
Read BHPian comments for more insights and information.
