Installation is simple. Undo the top screw and bottom bolt. It needs 8mm T spanner and 14mm ring spanner for bottom.
BHPian Vignesh_N/A recently shared this with other enthusiasts.
I fitted the adv adjustable suspension in my 2017 Duke 390 on Saturday.
Initial impressions are great. I have done 500 kms so far. The rear is much more settled and doesn’t crash like before over bad stretch of roads. One reason I could think of is the rebound doing its job perfectly now. 13 clicks as per the manual and preload at 3. Another difference I could notice is, earlier it used to squat and never return back when I sit (preload at 2 and 3). And I weigh only 59 Kg.
The stock had protective cup to prevent dirt entering. This model has the cover built inside the coils. Still, I am thinking of adding a removable cover.
Installation is simple. Undo the top screw and bottom bolt. It needs 8mm T spanner and 14mm ring spanner for bottom.
For Duke, the rebound has to be set before the installation as we cannot access the screw afterwards
Check out BHPian comments for more insights and information.
