Home CAR & BIKES My fully-loaded BMW R 1300 GS: Over 40 aftermarket parts & accessories

My fully-loaded BMW R 1300 GS: Over 40 aftermarket parts & accessories

My fully-loaded BMW R 1300 GS: Over 40 aftermarket parts & accessories

My fully-loaded BMW R 1300 GS: Over 40 aftermarket parts & accessories BHPian adi_sun recently shared this with other enthusiasts: It’s been long since I updated this thread. A lot has been added to the bike, much more than I planned. A few more things are still in shipment. Well I know I have gone overboard this time with the add ons and all might not be absolutely required. The thing about motorcycles is that you don’t know where to stop, at least I don’t and for good maybe – keeps me happy. On the electronics front, I added 2 Hex cans that gave me 8 ports.4 are used for front and rear T3s1 for Lone rider lights1 for Denali D41 for CarPlay1 for heated seatsHave tried putting the mods in three categories -1 Protection / Ergonomics :Crash bar lower with bars plateCrash bar upperEngine CoverBrake calliper guardSide stand extenderHeadlight GuardFront slidersRear SlidersRider FootpegsGear leverBrake leverMirrorsPhone mount with anti-vibrationBMW standard seatMudguard extensionIndicator guardsThrottle body guardO2 sensor guardFront ABS guardEngine guard slider (big)Radiator guardRear wheel slider spoolInstrument display sun visorLights :Cansmart 1Cansmart 2Lone rider MotolightsDriving lights Denali D4Denali D4 Amber coversDenali D4 blackoutT3 (rear)T3 (front)T3 number plate light mountT3 handle bar light mountT3 Wiring harnessLight Mounting AdapterOthers:Carplay + cameraHornServo exhaustChigee TR100 Two-Way QuickSW motech bagLower and upper engine guard | Honestly upper is not needed but still got it Innovv N1 camera | CarPlay, navigation and no need to put the phone on mount all the time, plus wanted a dash cam to record in case it’s required. Denali T3 lights (rear) | 1300Gs has no centre brake light and the stock with indicators are too dim so lit this one up like a Christmas tree Denali T3 lights (front puddle) | These are meant to sit flush on bark busters, till then it’s fixed not so well but does light up wonderfully Lower sliders | protection Headlight guard | protection Front sliders | protection Evotech calliper guard | protection (not sure if actually required) Front abs guard | protection (not sure if actually required) O2 sensor guard | protection (not sure if actually required) Mudguard extension | In the rain the engine case used to get really dirty Engine guard extension | protection (not sure if actually required) SW Motech brake lever and foot pegs Indicator guards | protection (not sure if actually required) like the look Name tags | just because all my bikes had my name Innovv N1 | CarPlay All lights in action ( I am very careful not the blind the oncoming traffic, the setup is very bright) Shaft guard | protection (not sure if actually required) SP connect phone mount with anti vibration mount SW motech gear lever Instrument panel sun hat | Only once I felt glare not really required Chigee charger | two-way charger looks promising Double take mirrors with ram mount and locks | off road mirrors All lights (lone rider lights come with beast mode that’s a pencil beam that really goes very far) Side stand extension Lone rider and Denali lights T3 lights lit up Radiator guards Lights Front camera placement Check out BHPian comments for more insights and information.

Source link