Cruise control can now be added to pre-OBD-2 B MY 2024 and early 2025 KTM Gen 3 Duke 390s
BHPian 44_bhp recently shared this with other enthusiasts:
Gen 3 KTM Duke 390 Owners Alert! (MY 2024 & early 2025)
Cruise control can now be added to pre-OBD-2 B MY 2024 and early 2025 Gen 3 Duke 390s.
I have already posted this in another Team-bhp thread (2024 Duke 390 review thread), but posting here again as this is the main thread for D390 people.
I got my D390 in Jan this year without the cc. When the updated model with cc was launched, I started to dig and DIY to ascertain if the cc can be installed and activated in the old models. Found a hidden ‘4 pin’ socket behind the headlight assembly. The socket itself was plugged off by a dummy cap. That hidden socket is already present in all our bikes but is utilised in the newer models.
So I got myself a new cc combination switch. The cc combination switch has one extra ‘4-pin’ socket which plugs into this hidden socket. I installed the cc combination switch and it fit perfectly. The new socket fit perfectly too!
Went to the service centre to check if it works. (This was before the software update became available). It worked. Confirmed this through live parameters page on their OBD tool.
A software update became available two weeks ago. New TFT version- 1V13. New EMS Hex file version number- 8101 (last four digits of hex file version number)
Cruise control now works flawlessly, and the custom switch was activated too.
This update is available through KTM Sanpada and KTM Thane service centres in Mumbai region. I don’t know if other Mumbai service centres have received the technical bulletin for this update yet or not.
Socket photos are screenshots of a YouTube vlog. Some guy was installing HJG fog lights on his bike, that’s how I discovered the presence of the hidden socket.
Happy riding!
Check out BHPian comments for more insights and information.
